Turkey Upright Plumes
$15.12 – $25.50
Plumes are handcrafted in the USA using the highest quality materials and are available in your choice of height and color. Plumes are custom made for each order and are therefore nonreturnable.
Please allow 1-4 weeks for production depending on the size of the order. For larger orders placed during August and September, allow up to 6 weeks for production. For rush orders, please call to confirm production time before placing your order.
How to Measure Marching Band Plumes:
Plumes are sized by even numbers and in increments of two inches. Please measure carefully. Plume sizes cannot be altered after manufacturing.
Fountain, Drooping, Upright, & Stickup: Plumes are measure from wire tip to wire tip. Stand the plume on a flat surface, stand a ruler next to the plume, place your finger on top of the plume wire and measure. The plume may measure an increment past the inch scale. If this is the case your finger may not be touching the tip of the wire because the material is in the way. Example: A plume that measures 8 1/4 inches is an 8 inch plume.
Phantom, Cavalier, Aussie, & Ostrich: Measure the length of the wire or stem not including the Shako or Tri-wire, if applicable.
The Use & Care of Marching Band Plumes:
Our plumes are skillfully handcrafted in the USA from domestically and internationally sourced natural and synthetic materials.
Feathers are dyed with water-based dyes. Due to the nature of the dye, color fastness cannot be guaranteed. Avoid getting plumes wet or damp. Wet or damp plumes can be gently wiped with a soft paper towel and must be allowed to completely air-dry before they are stored.
To keep plumes looking their best, plumes should be stored in plastic sleeves in their tubes away from moisture, heat, and light. Phantom or Cavalier style plumes should be stored flat in their bags.
Plumes should be inserted or removed from headwear by the metal cup. Handle plumes by the cup or wire base only. It is important to note the direction of the feathers when inserting or removing plumes from tubes. For Drooping or Fountain style, always insert the top first and remove by pushing the plume through from the wire end. For Upright or Stickup style, insert the wire end first and remove by pulling the plume from the tube by the wire.
Only logged in customers who have purchased this product may leave a review.